Opacmare Easy Electronics Control Panel Replacements: 2 & 4 Function Guide
Still identifying the installed system? Start with our Opacmare handset, control and sensor identification checklist for the model, connector and mounting details to collect before ordering.
Opacmare Easy Electronics Control Panel Replacements: 2 & 4 Function Guide
Has your Opacmare control panel stopped working, become worn or suffered damage? The original two-function and four-function panels used with Opacmare Easy Electronics systems have been discontinued, but replacement options are available.
Boat Parts Superstore offers both the official Opacmare stainless steel replacement panels and a lower-cost aftermarket alternative. Both options provide the same operation and connector arrangement for compatible Easy Electronics installations, although their mounting methods differ.
This guide explains how to identify your existing panel, compare the replacements and check what is involved before ordering.
Which Opacmare Control Panel Do You Have?
Opacmare Easy Electronics control panels are used on equipment such as passerelles, tender lifts, balconies and garage doors. The panel required depends on the equipment and control system installed on your boat.
The original panels have a cable with a white connector at the rear. This connects to an extension cable running to the main hydraulic pack and electronics modules.
There are various versions with the following two the most common and covered by this guide:
- 2-function panel: up and down directional controls.
- 4-function panel: up, down, left and right directional controls.
Both versions also have OFF and lighting controls. Match the function configuration of your existing panel when choosing a replacement.
Original Opacmare 2 Function Control Panel
The original two-function panel has two directional buttons and a black or cream surround. It is secured from the front with fixings in each corner, concealed by the surround.
View the discontinued Opacmare 2 Function Control Panel.
Original Opacmare 4 Function Control Panel
The original four-function version has four directional buttons and uses the same front-mounted corner-fixing arrangement.
View the discontinued Opacmare 4 Function Control Panel.
Option 1: Official Opacmare Stainless Steel Replacement
Opacmare has replaced the discontinued panels with stainless steel versions. These genuine Opacmare panels retain the same operating functions and connector arrangement for compatible Easy Electronics systems.
The most visible change is the brushed stainless steel face, with round buttons and an engraved Opacmare boat logo.
The mounting arrangement has also changed. The stainless steel panel is secured from behind, whereas the original panel is secured from the front with corner fixings. Access behind the mounting surface and the panel’s installation dimensions therefore need to be checked before fitting.
Official 2 Function Stainless Steel Panel
The official two-function replacement provides up and down controls, alongside OFF and lighting buttons.
Shop the official Opacmare 2 Function Stainless Steel Control Panel.
Official 4 Function Stainless Steel Panel
The official four-function replacement provides up, down, left and right controls, alongside OFF and lighting buttons.
Shop the official Opacmare 4 Function Stainless Steel Control Panel.
Option 2: Aftermarket Easy Electronics Alternative
A lower-cost aftermarket control panel is also available for compatible Opacmare Easy Electronics installations.
This alternative is made by a third party, rather than Opacmare. It provides the same operating functions and uses the same connector arrangement, offering another option when replacing a damaged or worn panel.
The aftermarket panel has a white surround and light blue control face. Unlike the official stainless steel version, it is secured from the front with fixings in each corner, following the mounting approach of the original panel.
Panel dimensions, the mounting opening and fixing centres should still be checked before installation.
Aftermarket 2 Function Panel
The two-function aftermarket alternative has up and down directional buttons, together with OFF and lighting controls.
Shop the Opacmare 2 Function Easy Electronics Alternative.
Aftermarket 4 Function Panel
The four-function aftermarket alternative has up, down, left and right directional buttons, together with OFF and lighting controls.
Shop the Opacmare 4 Function Easy Electronics Alternative.
Official Opacmare vs Aftermarket: What Is the Difference?
| Feature | Official Opacmare stainless steel panel | Aftermarket alternative |
|---|---|---|
| Manufacturer | Opacmare | Third-party manufacturer |
| Appearance | Brushed stainless steel | White surround with light blue face |
| Versions available | 2-function and 4-function | 2-function and 4-function |
| Operation | Same functions as the corresponding original panel | Same functions as the corresponding original panel |
| Electrical connection | Same connector arrangement for compatible systems | Same connector arrangement for compatible systems |
| Mounting | Secured from behind | Front-mounted corner fixings |
| Cost | Official option | Lower-cost alternative |
The official panel suits owners who prefer a genuine Opacmare component and stainless steel finish. The aftermarket version offers a cheaper alternative and retains front access to the corner fixings.
What Should You Check Before Ordering?
Before selecting your replacement Opacmare control panel, confirm:
- Your electronics system: these options are for compatible Easy Electronics installations.
- The number of functions: choose the matching two-function or four-function version.
- The connector: compare your existing plug and wiring arrangement with the replacement.
- Panel dimensions and mounting opening: matching electrical connections do not establish physical fit.
- Fixing positions and rear access: particularly important when changing to the rear-secured stainless steel version.
If you are unsure, take photographs of the front and rear of your existing panel, its connector and any identification labels.
Frequently Asked Questions
Have the original Opacmare Easy Electronics panels been discontinued?
Yes. The original panels covered by this guide have been discontinued. Official stainless steel replacements and aftermarket alternatives are available in two-function and four-function versions.
Does the stainless steel panel work in the same way?
Yes, the corresponding official replacement provides the same operation and connector arrangement for compatible Easy Electronics systems. Its mounting method differs: the stainless steel panel is secured from behind.
Is the cheaper alternative made by Opacmare?
No. It is a third-party aftermarket panel designed to provide the same operation and connection for compatible installations.
Does the aftermarket panel mount from the front?
Yes. It uses fixings in each corner from the front. Check its dimensions and fixing centres against your existing installation before fitting.
Can I choose a four-function panel instead of a two-function panel?
Choose the version specified for your existing equipment and control system. Extra buttons do not establish compatibility or add functions to the equipment.
Need Help Finding Your Opacmare Replacement Panel?
Contact Boat Parts Superstore with photographs of your existing panel, connector and any part number labels. Tell us which equipment it operates and whether you need a two-function or four-function panel.
We can help you identify the appropriate option and the installation details to check before ordering.